4-2 Basic Operations

4-2-1 Creating Clip Lists

You can create a clip list by selecting a desired clip from the thumbnail display, and including it in the clip list as a sub clip.

Note

Up to 99 clip lists can be handled in the CLIP menu.

Including a clip selected from the thumbnail display in the clip list

Proceed as follows.

2~4

 

 

1

 

 

Thumbnail

THUMBNAIL

 

indicator

 

SEL/SET

Sub clip

ESSENCE MARK

S.SEL

SUB CLIP

indicator

 

 

3

CLIP MENU

SHIFT

PRESET

F-RUN

REGEN

SET

 

CLOCK

R-RUN

2

1 With the sub clip indicator off, press the THUMBNAIL button, turning on the thumbnail indicator.

The thumbnails of the clips on the disc appear.

Notes

•If the MENU ON/OFF switch is set to ON, set it to OFF and press the THUMBNAIL button.

•If you set the MENU ON/OFF to ON during thumbnail display, thumbnail display is cancelled and replaced with menu display.

2 Use the SEL/SET dial or the MENU knob to select the clip you want to include in the clip list.

3 Hold down the SHIFT button, and press the SEL/SET dial.

The scene selection window appears.

To escape from the scene selection window to the previous screen

Press the RESET button.

4 Press the SEL/SET dial or the MENU knob.

This adds the selected clip to the clip list as a sub clip. At the same time, this closes the scene selection window and returns to the original thumbnail display.

5 Repeat steps 2 to 4 until all desired clips have been added to the clip list.

The scene selection window shows the thumbnails of the sub clips that have already been included in the clip list. The cursor within the window indicates the position in which the next sub clip will be included.

Selection Scene 4 Chapter

4-2 Basic Operations 67