To cancel the setting
Before executing step 8, move the b mark to “ESC” at the top right of the window and press the MENU knob. Alternatively, push the CANCEL/PRST / ESCAPE switch down to the ESCAPE side.
All settings or changes are discarded and the TIME/DATE page of the DIAGNOSIS menu appears.
7-3-7 Selecting the Lens File
The LENS FILE page of the USER menu allows you to change the lens file according to the lens in use.
Note
When using a serial lens, lens file selection is not possible.
Proceed as follows.
1 Set the MENU ON/OFF switch to ON.
The last accessed menu page appears on the screen.
2 Turn the MENU knob until the LENS FILE page appears, then press the MENU knob to select the page.
The LENS FILE page shows the name and the
7-3-8 Selecting the Aspect Ratio
The FORMAT page of the OPERATION menu allows you to select the aspect ratio of the video output signal.
Note
When the
Proceed as follows.
1 Follow the procedure of steps 1 to 3 described in
20FORMAT
16:9/4:3 SELECT : 16:9
SCAN | MODE | : | I |
UC/J | SELECT | : | UC |
Settings Detailed and Displays Menu 7 Chapter
U15 | LENS | FILE | TOP |
LENS | FILE | SELECT: | 1 |
F.ID | : |
|
|
3 Turn the MENU knob to move the b mark to LENS FILE SELECT, and press the MENU knob.
The b mark on the left of the selected item changes to a z mark and the z mark on the left of the setting changes to a ? mark.
4 Turn the MENU knob until the lens file No. in use appears, then press the MENU knob.
The z mark changes to a b mark and the ? mark changes to a z mark.
If you do not want to use a lens file
Select NO OFFSET.
5 To end the menu operation, set the MENU ON/OFF switch to OFF or close the cover of the menu operating section.
2 Turn the MENU knob to move the b mark to “16:9/4:3 SELECT”, and press MENU knob.
The b mark on the left of the selected item changes to a z mark and the z mark on the left of the setting changes to a ? mark.
3 Turn the MENU knob to display the desired aspect ratio, and press the MENU knob.
The z mark changes to a b mark and the ? mark changes to a z mark.
4 To end the menu operation, set the MENU ON/OFF switch to OFF or close the cover of the menu operating section.
To display the aspect ratio of 16:9/4:3 on the viewfinder screen
By setting the “DISP 16:9/4:3 ID” item on the VF DISP 2 page of the USER menu to “ON”, “16:9” or “4:3” appears on the viewfinder screen when the aspect ratio of 16:9 is selected.
For details, see
128