Scene 4 Chapter
Total duration of the sub clips in the current clip list
Cursor
(Insertion position for the next sub clip to be included)
Thumbnails of the sub clips already included in the current clip list
SEL/SET dial
THUMBNAIL button
Thumbnail | THUMBNAIL |
| |
| SEL/SET | ||
indicator |
|
| |
| ESSENCE MARK | S.SEL | |
| SUB CLIP | ||
|
| ||
SUB CLIP button |
|
| |
SHIFT button | CLIP MENU | SHIFT | |
PRESET | |||
| |||
| REGEN | SET | |
| CLOCK |
MENU knob
Selection
To move the cursor within the scene selection window
When the scene selection window appears as you carry out step 3, use the SEL/SET dial to move in the desired direction.
6 When you have added all of the desired clips, save the current clip list to disc.
For details, see
Note
Unless the current clip list has been saved to disc, its contents will be lost when the camcorder is powered off or the disc is ejected. After creating a clip list, be sure to save it.
4-2-2 Editing Clip Lists
You can carry out the following operations on sub clips within a clip list.
•Moving sub clips (changing the sequence)
•Trimming sub clips
•Deleting sub clips
For details of how to add sub clips, see the procedure in 4-
Loading a clip list to edit from disc
Proceed as follows.
1 With the thumbnail indicator off, hold down the SHIFT button, and press the SUB CLIP button.
The CLIP menu appears.
Notes
•If the MENU ON/OFF switch is set to ON, set it to OFF, then press the SUB CLIP button with the SHIFT button held down.
•If you set the MENU ON/OFF switch to ON while the CLIP menu is being displayed, thumbnail display is cancelled and replaced with menu display.
<CLIP MENU>
LOAD
SAVE
DELETE
CLEAR
TC PRESET
2 Use the SEL/SET dial or the MENU knob to move the cursor to LOAD, and press the dial/knob.
A list of the clip lists on the disc appears.
68