4-3-5 Clearing the Current Clip List
Proceed as follows to clear the current clip list, leaving it with no clip list loaded.
1 Select CLEAR in the CLIP menu, and press the SEL/ SET dial or the MENU knob.
The following screen display appears.
CLIP LIST CLEAR | ESC |
CLEAR CLIP LIST : EXEC
2 Press the SEL/SET dial or the Menu knob.
The message “EXECUTE OK? YES b NO” appears.
3 Turn the SEL/SET dial or the MENU knob to move the
bmark to “YES” and press the dial/knob.
The current clip list is cleared, leaving it with no clip list loaded.
4 Hold down the SHIFT button and press the SUB CLIP button.
CLIP menu operations end.
4-3-6 Setting the Start Time code of the Current Clip List
The start time code (LTC) of the current clip list is set to 00:00:00:00 when the camcorder is powered on and when a disc is inserted.
You can set the start time code to any value. Proceed as follows.
1 Select TC PRESET in the CLIP menu, and press the SEL/SET dial or the MENU knob.
The following screen display appears.
CLIP | LIST TC PRS | ESC |
HOUR | : | 00 |
MIN | : | 00 |
SEC | : | 00 |
FRAME | : | 00 |
OK
2 Turn the SEL/SET dial or the Menu knob to select the item (HOUR, MIN, SEC, or FRAME) which you want to set, then press the dial/knob.
3 Turn the SEL/SET dial or the Menu knob until the desired value is displayed, then press the dial/knob.
4 After all items have been set, select OK, and press the SEL/SET dial or the MENU knob.
The starting time code of the current clip list is set to the specified LTC value. The count starts from that value when playback starts.
5 Hold down the SHIFT button and press the SUB CLIP button.
CLIP menu operations end.
Selection Scene 4 Chapter
73 | |
|
|