CLIP LIST LOAO ESC
E0001 04/08/08 21:57
E0002 04/08/24 11:15
E0003 04/08/25 15:30
E0004 NEW FILE
E0005 NEW FILE
E0006 NEW FILE
E0007 NEW FILE
E0008 NEW FILE
E0009 NEW FILE
E0010 NEW FILE
3 Select the desired clip list (except for NEW FILE), and press the SEL/SET dial or the MENU knob.
The message “LOAD OK? YES b NO” appears.
4 Turn the SEL/SET dial or the MENU knob to move the
bmark to “YES” and press the dial/knob.
The selected clip list is loaded into the current clip list.
5 Hold down the SHIFT button and press the SUB CLIP button.
CLIP menu operations end.
Moving a sub clipProceed as follows.
1 Press the SUB CLIP button, turning on the indicator.
2 Press the THUMBNAIL button, turning on the indicator.
Thumbnails of the sub clips within the current clip list appear.
Notes
•If the MENU ON/OFF switch is set to ON, set it to OFF and press the THUMBNAIL button.
•If you set the MENU ON/OFF to ON during thumbnail display, thumbnail display is cancelled and replaced with menu display.
Press the THUMBNAIL button, turning off the indicator.
3 Use the SEL/SET dial or the MENU knob to select the desired sub clip.
4 Hold down the SHIFT button, and press the SEL/SET dial.
The sub clip operation menu appears.
To return to the thumbnail display without moving the sub clip
Do either of the following.
•Use the SEL/SET dial or the MENU knob to select EXIT, and press the dial/knob.
•Press the RESET button.
5 Use the SEL/SET dial or the MENU knob to select MOVE, and press the dial/ knob.
The sub clip movement screen appears. The sub clip selected in step 3 appears surrounded by a frame.
This shows that third sub clip is moved to the position of eighth sub clip.
Cursor showing the position to which the selected sub clip is moved
Selection Scene 4 Chapter
To escape from the thumbnail display to the full- | To escape from the sub clip movement screen to the |
screen display | previous screen |
| Press the RESET button. |