Note
If files have been saved in the page selected in step 2, those files are replaced with files loaded from the camcorder memory. For example, files from 001 to 005 are replaced.
Setting the file ID
Before the data is saved as a scene file, it is useful to set a file ID to identify it. The set file ID is saved together with the data.
To set the file ID, proceed as follows.
1 On the SCENE FILE page, turn the MENU knob to move the b mark to “F. ID”.
F04 | SCENE FILE | TOP |
s1 | :STANDARD |
|
s2 | :STANDARD |
|
s3 | :STANDARD |
|
s4 | :STANDARD |
|
s5 | :STANDARD |
|
sSTANDARD |
|
| |
SCENE | RECALL | : | EXEC |
SCENE | STORE | : | EXEC |
F.ID: |
|
|
|
2 Press the MENU knob.
A character table appears, allowing you to select characters you want to enter.
U16 USER FILE | TOP |
INS DEL | RET | ESC | END |
sSTANDARD |
|
| |
SCENE | RECALL | : | EXEC |
SCENE | STORE | : | EXEC |
F.ID: | x |
|
|
3 Carry out the operations for steps 4 and 5 described in
Note
Set the file ID before saving the scene file in the “Memory Stick” or the camcorder memory. Otherwise, the file ID is not saved with the other data.
4 When you finish entering the file ID, turn the MENU knob to move the x mark to “END”, then press the MENU knob.
The SCENE FILE page appears again.
04 SCENE FILE |
| TOP | |
s1 | :STANDARD |
|
|
s2 | :STANDARD |
|
|
s3 | :STANDARD |
|
|
s4 | :STANDARD |
|
|
s5 | :STANDARD |
|
|
sSTANDARD |
|
| |
SCENE | RECALL | : | EXEC |
SCENE | STORE | : | EXEC |
F.ID: | SCENE21 |
|
|
|
|
|
|
Carry out the procedure from step 3 in
The set file ID is saved together with the data.
Selecting the display contents
You can select the items of file information to be displayed on the SCENE STORE pages (P01 to P20) or the SCENE RECALL pages (P01 to P20) used for saving data to or loading data from a “Memory Stick”.
For details, “Selecting the display contents” on page 139.
8-2-2 Loading Scene Files
Proceed as follows.
1 In the TOP menu, select the FILE menu.
2 Turn the MENU knob until the SCENE FILE page appears, then press the MENU knob to select the page. Alternatively, on the CONTENTS page select “SCENE FILE”, and press the MENU knob to display the SCENE FILE page.
3 Load the scene file.
To load the scene file stored in the camcorder
Turn the MENU knob to move the b mark to the desired file number, and press the MENU knob.
The s which is displayed on the left of the file number changes to x.
The camcorder is set up according to the loaded scene file.
04 | SCENE FILE | TOP | |
s1 | :SCENE | 25 |
|
x2 | :SCENE | 26 |
|
s3 | :SCENE | 27 |
|
s4 | :SCENE | 28 |
|
s5 | :NO FILE |
|
|
sSTANDARD |
|
| |
SCENE | RECALL | : | EXEC |
SCENE | STORE | : | EXEC |
F.ID: | SCENE21 |
|
|
To cancel the selected scene file
Move the b mark to x, and press the MENU knob. x changes to s.
Data Setting User Loading and Saving 8 Chapter
143 | |
|
|