Sony 510P, 530P, PDW-510, PDW-530 White balance setting data to be saved in the scene file, Saving scene files from the camcorder memory to the “Memory Stick”

Data Setting User Loading and Saving 8 Chapter

P01 SCENE STORE		ESC
DISPLAY MODE	:	ALL

001.SCENE1 FEB/05/02 002.STANDARD 003.STANDARD 004.STANDARD 005.STANDARD

***.5FILE SAVE MEM1-5

2Turn the MENU knob to move the b mark to the desired file number, and press the MENU knob. The message “STORE OK? YES b NO” appears.

P01 SCENE STORE			ESC
STORE	OK?	YES	NO
DISPLAY	MODE	:	ALL

001.SCENE1 FEB/05/02 002.STANDARD 003.STANDARD 004.STANDARD 005.STANDARD

***.5FILE SAVE MEM1-5

3To carry out the storing, move the b mark to “YES” and press the MENU knob.

To cancel, press the MENU knob leaving the b mark pointing to “NO”.

You can select the contents of the user file to be displayed on the page.

For details, see “Selecting the display contents” on page 143.

5 To end the menu operation, set the MENU ON/OFF switch to OFF or close the cover of the menu operating section.

To return to the SCENE FILE page

After the message “COMPLETE” is displayed, move the b mark to “ESC” at the top right of the page by turning the MENU knob, then press the MENU knob.

White balance setting data to be saved in the scene file

The white balance setting data to be saved in the scene file depends on the setting of the SCENE WHITE DATA item on the REFERENCE page of the FILE menu.

F05REFERENCE

REFERENCE STORE : EXEC

REFERENCE CLEAR : EXEC

REFERENCE LOAD : EXEC

REFERENCE SAVE : EXEC

F.ID: sssssssssssssssss

SCENE WHITE DATA: OFF

When SCENE WHITE DATA is set to ON

The white balance setting data selected when you save the scene file is saved. For example, when the WHITE BAL switch is set to A, the adjusted values in memory A are saved in the scene file, and when the WHITE BAL switch is set to PRST, the preset value is saved.

When SCENE WHITE DATA is set to OFF

White balance setting data is not stored in the scene file.

Saving scene files from the camcorder memory to the “Memory Stick”

You can save five scene files from the camcorder to the “Memory Stick” in a single operation.

Proceed as follows.

1 After displaying the SCENE FILE page (see page 141) turn the MENU knob to move the b mark to “SCENE STORE”, then press the MENU knob.

One of the SCENE STORE pages appears.

2 Turn the MENU knob until the desired SCENE STORE page appears, then press the MENU knob.

P01 SCENE STORE		ESC
DISPLAY MODE	:	ALL
001.SCENE1	FEB/05/02
002.SCENE2	FEB/06/02
003.NO FILE
004.SCENE4	FEB/08/02
005.SCENE5	FEB/08/02

***.5FILE SAVE MEM1-5

3 Turn the MENU knob to move the b mark to “5FILE SAVE B MEM1-5”, and press the MENU knob.

The message “SAVE OK? YES b NO” appears.

P01 SCENE		STORE		ESC
SAVE	OK?		YES	NO
DISPLAY	MODE		:	ALL
001.SCENE1
002.SCENE2
003.NO	FILE
004.SCENE4
005.SCENE5
***.5FILE		SAVE		MEM1-5

4 To carry out the save, move the b mark to “YES” and press the MENU knob.

To cancel, press the MENU knob leaving the b mark pointing to “NO”.

When the save is completed, the message “COMPLETE” appears.

5 To end the menu operation, set the MENU ON/OFF switch to OFF.

142 8-2 Saving and Loading Scene Files