4-2 Basic Operations
4-2-1 Creating Clip Lists
You can create a clip list by selecting a desired clip from the thumbnail display, and including it in the clip list as a sub clip.
Note
Up to 99 clip lists can be handled in the CLIP menu.
Including a clip selected from the thumbnail display in the clip list
Proceed as follows.
2~4 |
|
|
1 |
|
|
Thumbnail | THUMBNAIL |
|
indicator |
| SEL/SET |
Sub clip | ESSENCE MARK | S.SEL |
SUB CLIP | ||
indicator |
|
|
3 | CLIP MENU | SHIFT |
PRESET | ||
REGEN | SET | |
| CLOCK |
2
1 With the sub clip indicator off, press the THUMBNAIL button, turning on the thumbnail indicator.
The thumbnails of the clips on the disc appear.
Notes
•If the MENU ON/OFF switch is set to ON, set it to OFF and press the THUMBNAIL button.
•If you set the MENU ON/OFF to ON during thumbnail display, thumbnail display is cancelled and replaced with menu display.
2 Use the SEL/SET dial or the MENU knob to select the clip you want to include in the clip list.
3 Hold down the SHIFT button, and press the SEL/SET dial.
The scene selection window appears.
To escape from the scene selection window to the previous screen
Press the RESET button.
4 Press the SEL/SET dial or the MENU knob.
This adds the selected clip to the clip list as a sub clip. At the same time, this closes the scene selection window and returns to the original thumbnail display.
5 Repeat steps 2 to 4 until all desired clips have been added to the clip list.
The scene selection window shows the thumbnails of the sub clips that have already been included in the clip list. The cursor within the window indicates the position in which the next sub clip will be included.
Selection Scene 4 Chapter