Operations File 6 Chapter
6-2 File Access Mode File Operations
File access mode operating environmentOperating system requirements for file operations by file access mode (called FAM below) are as follows.
•Computer operating system: Microsoft Windows 2000 Service Pack 4 or higher, or Microsoft Windows XP
PreparationsDo the following on the remote computer and this unit.
•Install the FAM driver on the remote computer.
•Enable FAM connections over the i.LINK connector.
To install the FAM driver
Insert the supplied
For details, refer to the ReadMe file contained on the CD- ROM disc.
To enable FAM connections over the i.LINK connector
Proceed as follows.
1 Set the MENU ON/OFF switch to ON.
The last accessed page appears.
2 Turn the MENU knob to scroll to the OUTPUT page, then press the MENU knob.
The OUTPUT page appears. The current settings appear on the right side of each item.
3 Move the b mark to “PC REMOTE”, then press the MENU knob.
The b mark changes to a z mark, and the z mark changes to a ? mark.
U01 | OUTPUT |
|
| TOP |
LCD | BRIGHT | <L> | : | 0 |
LCD | BRIGHT | <H> | : | 0 |
LCD | COLOR |
| : | 0 |
PC | REMOTE |
| : | DSABL |
REAR BNC OUT SEL: | VBS |
4 Turn the MENU knob to select ENABL, then press the MENU knob.
The setting is confirmed. The z mark changes to a b mark and the ? mark changes to a z mark.
5 Set the MENU ON/OFF switch to OFF to end the menu operation.
Making FAM connectionsProceed as follows.
1 If there is a disc loaded in this unit, put the unit into the following state.
•Recording, playback, search and other disc operations: Stopped
•Thumbnail indicator (see page 31): Off
•Disc access by DELETE LAST CLIP, DELETE ALL CLIPS (see page 48), QUICK FORMAT (see page 44), and so on: Stopped
•Picture Cache function and Interval Rec function: Off
•MENU ON/OFF switch: OFF
2 If this unit is connected to a remote computer by FTP, log out from the FTP session (see page 99).
3 Connect the i.LINK DV IN/OUT S400 connector on this unit to the i.LINK (IEEE1394) connector on the remote computer, using an i.LINK cable.
Note
As the i.LINK cable, use an
It may not be possible to establish a FAM connection if a longer cable is used.
File data |
|
| Transfer of files |
Laptop computer, etc. | |
530/530P |
|
i.LINK cable (not supplied)
Windows recognizes this unit as a removable disc, and displays one of the following icons on the remote computer’s task bar:
•Windows 2000:
•Windows XP:
The remote computer is now able to perform file operations when a disc is inserted into this unit.
96