Sony PFM-32C1, PFM-32C1E Fan, OK:, NG:, OK: Normal, OK: Normal, Temperature, NG: Unusual, NG: Unusual, Indicates whether the internal temperature of the display unit is normal

Using On-screen Menus

TemperatureIndicates whether the internal temperature of the display unit is normal.OK: NormalNG: Unusual

When the internal temperature is unusual, NG is displayed and the item flashes in red. The STANDBY indicator on the 1 (standby) switch / indicator section also flashes.

Note

When the ventilation holes are blocked or the display is used in a place with poor ventilation, “ NG” may be displayed, flashing in red. In this case, check that the ventilation holes are not blocked and install the display unit in a well ventilated location. If the message is still shown, contact your authorized Sony dealer.

When the STANDBY indicator flashes or NG is indicated, see “Self-diagnosis Function” on page 45 (GB).

Fan

Cooling fans are built into this display unit. This item indicates whether the cooling fans work properly.

OK: Normal

NG: Unusual

When the cooling fans are not working normally, NG is displayed and the item flashes in red. The STANDBY indicator on the 1 (standby) switch / indicator section also flashes.

Notes

•If “ NG” is displayed, flashing in red, contact the dealer from whom you purchased the unit, or your nearest Sony Service Center.

When the STANDBY indicator flashes or NG is indicated, see “Self-diagnosis Function” on page 45 (GB).

•The cooling fans detect the display unit’s internal temperature and control the fan rotation. If the ambient temperature is high, the fan speed increases and the fan noise will be louder.

23 (GB)