Watching the Picture

Watching the Picture

Before you start •Turn on the display.

•Turn on the connected equipment and play a video source.

•To display the input signal information and Picture Mode on the screen when turning on the power or switching the input signal, set “ Display” in the Custom Setup menu to On.

•To select the on-screen language used in the menu, see page 39 (GB).

Switching the Input Signal

1 Press MENU.

The main menu appears on the display panel.

P i c t u r e / S o u n d C o n t r o l

P i c t u r e M o d e : S t a n d a r d

A d j u s t P i c t u r e

A d j u s t S o u n d

,

t

o s

e l

e c t , ENTER ,

t o

e n t e r

a d j .

m e n u

 

2 Press M/m to move the cursor (yellow) to “ Input Select” and press ENTER.

Input Select menu appear on the display panel.

I n p u t S e l e c t

I N P U T 1 ( R G B )

I N P U T 1 ( C O M P O N E N T )

I N P U T 2 ( R G B )

I N P U T 2 ( C O M P O N E N T )

V I D E O ( C O M P O S I T E )

V I D E O ( Y / C )

,

t o s

e l e c t , p r e s s ENTER

t o

e x e c u

t e

3 Press M/m to move the cursor (yellow) to the input source to be displayed and press ENTER. INPUT1 (RGB): Selects the audio and video

signal input from the INPUT1 connectors when the input signal is an RGB signal.

INPUT1 (COMPONENT): Selects the audio and video signal input from the INPUT1 connectors when the input signal is a component signal.

INPUT2 (RGB): Selects the audio and video signal input from the INPUT2 connectors when the input signal is an RGB signal.

INPUT2 (COMPONENT): Selects the audio and video signal input from the INPUT2 connectors when the input signal is a component signal.

VIDEO (COMPOSITE): Selects the audio and video signal input from the COMPOSITE IN connector and AUDIO IN jack among the VIDEO connectors.

VIDEO (Y/C): Selects the audio and video signal input from the Y/C IN connector and AUDIO IN jack among the VIDEO connectors.

The selected input signal appears on the display panel.

Color system or horizontal/vertical frequency

Signal type

I N P U T 1 ( R G B ) 1 0 2 4 7 6 8 / 6 0

S t a n d a r d

Picture mode

You can switch the input signal using the Remote Commander supplied with your display panel.

Note

We recommend input source video equipment equipped with a TBC (time base corrector). If the display receives a signal without TBC, the picture may disappear due to disturbance of the sync signal.

24 (GB)