Self-diagnosis Function / Operating a Specific Display With the Remote Commander

Self-diagnosis FunctionThe unit has a self-diagnosis function.

This function shows the display’s condition based on the pattern shown by the flashing of the STANDBY indicator. The flashing pattern informs you of the display’s current condition.

If the STANDBY indicator flashes, check the number of flashes and contact your authorized Sony dealer.

1 Check the flashing pattern of the STANDBY indicator.

The indicator flashes (with an image showing on the display) or flashes at intervals of three seconds (with no image showing on the display).

Count the number of flashes if the indicator flashes at intervals of three seconds. For example, the indicator flashes twice, followed by a three second pause, two more flashes and this pattern repeats. In this case, the count for the number of flashes is two.

2 Unplug the unit.Inform your authorized Sony dealer of the number of flashes.

2 Input the index number of the display you want to operate using the 0 –9 buttons on the Remote Commander.

The input number appears right next to the index number of each display.

Input number

I n d e x N u m b e r . 1 1 7 1 1 7

3 Press ID MODE SET.

The characters on the selected display change to green while the others change to red.

You can operate only the display specified.4 After the necessary adjustment, press ID MODE OFF.The display returns to the normal mode.
Operating a Specific Display With the Remote Commander

Using the supplied Remote Commander, you can operate a specific display without affecting other displays that are installed at the same time.

1 Press ID MODE ON on the Remote Commander. Monitor index numbers appear in white characters on all the displays. (Every display is allocated an individual preset index number from 1 to 255.)

See “To change the index number” in the right-hand column on the this page to change the index number.

Index Number

To change the index number

You can change the index number if necessary. When you change the number, use the buttons on the control button section of the display unit.

1 Press MENU.

The main menu appears on the display panel.

P i c t u r e / S o u n d C o n t r o l

P i c t u r e M o d e : S t a n d a r d

A d j u s t P i c t u r e

A d j u s t S o u n d

,

t

o s

e l

e c t , ENTER ,

t o

e n t e r

a d j .

m e n u

 

I n d e x N u m b e r . 1 1 7 . . .

45 (GB)