Sony PSP-1006 K, PSP-1007 K Under, 3 Send the image. (sender), Sending and receiving images, With the image displayed, press the, Select "Receive", and then press the

Sending and receiving images

You can transfer images with another PSP™ system using ad hoc mode (page 104). The steps for the sender and the receiver are different.

Sender Receiver

1 Set up for ad hoc mode. (both sender and receiver)1Turn on the WLAN switch on the left side of the PSP™ system (page 21).2 Prepare to receive the image. (receiver)

1Under , select the icon for the location where you want to save the image, and then press the button.

2Select "Receive", and then press the button. The system is now ready to receive an image.

3 Send the image. (sender)1Select the image you want to send, and then press the button.2 Select "Send", and then press the button.

The nicknames for PSP™ systems ready to receive an image are displayed.

3 Select the system to send to, and then press the button. The system starts to send the image.

4 Save the image that you received. (receiver)

When the transfer is completed, the image that was received is displayed on the screen.

1With the image displayed, press the button. A confirmation message is displayed.

2Select "Yes", and then press the button.

Hints

•The location where an image is saved depends on your selection in step 2-1. Note that you cannot save images in the Digital Camera Images folder.

•You can also transfer images from the on-screen control panel (page 71).

GB

Photo

Photo options menu 77