When “DOLBY DIGITAL” is applied, the program format name and channel numbers appear as follows:
Example: Dolby Digital 5.1 chRear component × 2
DOLBY DIGITAL 3 / 2 . 1Front component × 2 + | LFE component × 1 |
Center component × 1 |
|
*1 “PCM,” “DTS,” or “DOLBY DIGITAL” appears depending on the disc.
*2 Appears only when the “DOLBY DIGITAL” format is applied.
To turn off the Play mode menu
Press (SETUP).
Tip
For Dolby Digital and DTS, “LFE” is always enclosed in a solid line regardless of the LFE signal component being output.
Adjusting the audio output level
— DVD level adjustmentThe audio output level for DVD video differs depending on the recorded audio format (PCM, Dolby Digital, or DTS). You can adjust the output level of PCM, Dolby Digital or DTS separately to reduce the volume level differences between disc and source.
1 Press (SYSTEM MENU).
2 Press M/m repeatedly to select “DVD LVL,” then press (ENTER).3 Press , to set toNote
You can adjust the output level only when a disc is inserted in the unit.
Tip
The output level is adjustable from
Changing the angles
You can change the viewing angle if various angles
ATT DVD
OFF
SRC MODE
TOP MENU + MENU
SOUND
SETUP
ENTER
SYSTEM LIST –
MENU
PICTURE
Z ⋅ Z EQ DSO EQ7
AUDIO SUBTITLE ANGLE
ANGLE
Press (ANGLE) repeatedly to select the desired angle number.2(2)
The angle changes.Note
Depending on the DVD, you may not be able to change the angles, even if
Tip
You can also change the viewing angle by selecting “ANGLE” in the Play mode menu (page 13).
23