Rotary commander RM-X4S

Attaching the labelAttach the indication label depending on how you mount the rotary commander.

SOUND

DSPL

MODE

MODE

DSPL

SOUND

Location of controls

The corresponding buttons on the rotary commander control the same functions as those on the main unit or the card remote commander.

ATT

 

SOUND

 

PRESET/

 

DISC

MODE

 

SOURCE

 

DSPL

OFF

 

VOL SEEK/AMS

OFF

The following controls on the rotary commander require a different operation from the main unit or the card remote commander.

•PRESET/DISC control

To select preset stations; control CD, the same as (3)/(4) (ALBM –/+) on the main unit or M/ m on the card remote commander (push in and rotate).

•VOL (volume) controlThe same as the volume +/– buttons (rotate).•SEEK/AMS controlThe same as (SEEK) +/– on the main unit or./> on the card remote commander (rotate, or rotate and hold).
Changing the operative directionThe operative direction of the controls is factory- set as shown below.

To increase

To decrease

If you need to mount the rotary commander on the right hand side of the steering column, you can reverse the operative direction.

While pushing the VOL control, press and hold (SOUND).

Tip

You can also change the operative direction of these controls in the menu (page 36).

Auxiliary audio equipment

You can connect optional Sony portable devices to the BUS AUDIO IN/AUX IN terminal on the unit. If the changer or other device is not connected to the terminal, the unit allows you to listen to the portable device on your car speakers.

Note

When connecting a portable device, be sure BUS CONTROL IN is not connected. If a device is connected to BUS CONTROL IN, “AUX” cannot be selected with (SRC) (SOURCE).

Tip

When connecting both a portable device and a changer, use the optional AUX-IN selector.

Selecting auxiliary equipmentPress (SRC) (SOURCE) repeatedly until “AUX” appears.Operate by the portable device itself.To adjust the volume level of auxiliary equipment, see “AUX LVL” on page 36.

38