Radio
CautionWhen tuning in stations while driving, use Best Tuning Memory (BTM) to prevent an accident.
|
|
| ATT | DVD |
MODE | OFF |
|
|
|
|
|
|
| |
SRC | SRC | MODE | + | ./> |
|
| TOP MENU | MENU | |
ENTER | SOUND |
|
| M/m |
SETUP |
|
| ||
LIST |
|
| ENTER |
|
SYSTEM | LI ST | – |
| |
SYSTEM | MENU |
|
|
|
MENU | Z ⋅ Z | PICTURE |
|
|
| EQ | DSO | EQ7 | |
| AUDIO | SUBTITLE | ANGLE |
|
Number | 1 | 2 | 3 |
|
buttons | 4 | 5 | 6 | + |
| ||||
| 7 | 8 | 9 | VOL |
| CLEAR |
| DSPL | – |
|
| 0 |
|
Storing automatically
— BTM1 Press (SRC) (SOURCE) repeatedly until “TUNER” appears.To change the band, press (MODE) repeatedly. You can select from FM1, FM2, FM3, AM1 or AM2.
2 Press (SYSTEM MENU), then press M/m repeatedly until “BTM” appears.3 Press (ENTER).
The unit stores stations in order of frequency on the number buttons ((1) to (6)).
A beep sounds when a setting is stored.Storing manually
While receiving the station that you want to store, press and hold a number button ((1) to (6)) until “MEM” appears.
The number button indication appears in the display.Note
If you try to store another station on the same number button, the previous stored station will be replaced.
Receiving the stored stations
Select the band, then press a number button ((1) to (6)) or M/m.Tuning automatically
Select the band, then press ./> to search for the station.Scanning stops when the unit receives a station. Repeat this procedure until the desired station is received.
Tip
If you know the frequency of the station you want to listen to, press and hold ./> to locate the approximate frequency, then press ./> repeatedly to fine adjust to the desired frequency (manual tuning).
With the main unit
To search for the station, press (SEEK)
Receiving a station through a list
—33