Optional accessoriesOverhead Monitor

 

XVM-R70

 

Headrest Monitor

 

XVM-H65

 

Mobile Monitor

 

XVM-F65 (for MEX-R1)

 

Mobile Monitor

 

XVM-F65WL

 

(for MEX-R5)

 

CD changer (10 discs)

 

CDX-757MX, CDX-656X

 

MD changer (6 discs)

 

MDX-66XLP

 

Source selector

 

XA-C30

 

AUX-IN selector

 

XA-300

 

Optical audio cable

 

RC-104
US and foreign patents licensed from Dolby Laboratories.

MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson.

Note

This unit cannot be connected to a digital preamplifier or an equalizer which is Sony BUS system compatible.

Design and specifications are subject to change without notice.

Lead-free solder is used for soldering certain parts. (more than 80 %)

Halogenated flame retardants are not used in the certain printed wiring boards.

Halogenated flame retardants are not used in cabinets.

VOC (Volatile Organic Compound)-free vegetable oil based ink is used for printing the carton.

Packaging cushions do not use polystyrene foam.

Troubleshooting

The following checklist will help you remedy problems you may encounter with your unit. Before going through the checklist below, check the connection and operating procedures.

General

No power is being supplied to the unit.The power connection has not been made correctly.t Check the connection. If everything is in order, check the fuse.The car does not have an ACC position. t Insert a disc to turn on the unit.

If the unit is turned off and the display disappears, it cannot be operated with the remote commander.

t Turn on the unit.The power aerial does not extend.The power aerial does not have a relay box.Stored stations and correct time are erased. The fuse has blown.Makes noise when the position of the ignition key is switched.The leads are not matched correctly with the car’s accessory power connector.The display disappears from/does not appear in the display window.The dimmer is set to “DIM-ON” (page 36).The display disappears if you press and hold(OFF).t Press and hold (OFF) again until the display appears.The connectors are dirty (page 40).DSO does not function.

Depending on the type of car interior or type of music, DSO may not have a desirable effect.

Depending on the connected monitor, the unit may take a few seconds to turn off after turning the ignition switch to the OFF position. This is not a malfunction.

continue to next page t

43