Sony RDR-GX7 Recording TV programmes using the VIDEO Plus+ system, Press, Press, Press, Press, ENTER, ENTER, aPress }/1, ePress [TIMER], ◆ If you make a mistake

Recording TV programmes using the VIDEO Plus+ system

The VIDEO Plus+ system is a feature that simplifies setting timer recordings. Just enter the PlusCode number listed in the TV programme guide. The date, time, and programme position of that programme are set automatically.

Check that the channel is correctly set in “Channel Setting” in “Settings” (page 75).

Z "/1

Number buttons

CLEAR

SET

[TIMER]

</M/m/,,

RETURN ENTER

x REC STOP

aPress }/1.

bTurn on the TV, and switch the input selector on your TV so that the signal from the recorder appears on the TV screen.

◆When using an amplifier (receiver)

Turn on the amplifier (receiver) and select the appropriate channel so that you can hear sound from the recorder.

cPress Z, and place a recordable disc on the disc tray.

dPress Z to close the disc tray.

Wait until “LOAD” disappears from the front panel display.

If you use an unused DVD, formatting starts automatically.

When using an unused DVD-RW, select the recording format, VR or Video.

ePress [TIMER].

The Timer programming (VIDEO Plus+) menu appears.

Timer - VIDEO Plus+

Set the timer by entering the timer code.
PlusCode No.
		Cancel
	Standard
If the Timer programming (Standard) menu appears,
press < to switch the display.
f Press the number buttons to enter the
			Recording/Timer
PlusCode number, then press SET.
◆ If you make a mistake
Press CLEAR and re-enter the correct number.
◆ To cancel the setting
Press M/m to select “Cancel,” then press ENTER.			Recording

g Press M/m to select “OK,” then press

ENTER.

The date, start and stop times, programme position or station name, recording mode, and PDC/VPS setting appears. For details about the PDC/VPS function, see page 26.

Timer - VIDEO Plus+

Is the follwing timer setting correct? To modify,											OK
adjust each item or re-enter the timer code.
											Cancel
Date	Start Stop						Prog.	Mode		PDC
										VPS
Mon 28.6	10	:	00	11	:	30	AAB		HQ	Off	Change

◆If you want to change the settingAPress </, to select the item you want to change.BPress M/m to change the setting.

To cancel the setting, select “Cancel.”

To re-enter the PlusCode number, select “Change.”

hPress </M/m/, to select “OK,” then press

ENTER.

The TIMER REC indicator lights up on the front panel, and the recorder is ready to start recording.

iPress RETURN to turn off the display.

To record from a decoder or other source, leave the connected equipment turned on.

To stop recording during timer recording

Press x REC STOP.

If the timer settings overlap

See page 27.

To confirm, change, or cancel timer recording

See “Checking/changing/cancelling timer settings (Timer List)” (page 28).

,continued

Timer Recording 29