Options Settings

The Options Setup allows you to set up other operational settings.

Select “Options” in the Setup Display. To use the display, see “Using the Setup Displays” (page 74).

The default settings are underlined.

Format Disc (DVD-RW only)

Selects the recording format when formatting a DVD-RW.

VR

Automatically formats the disc in VR

 

mode.

 

 

Video

Automatically formats the disc in

 

Video mode.

 

 

Selectable

Allows you to select the format before

 

formatting.

 

 

Bilingual Recording (for all recordable discs except DVD-RW in VR mode)

Selects the sound to be recorded on the disc. This setting is not necessary when recording on DVD-RWs (VR mode) that record both the main and sub sounds.

Main

Records the main sound for the bilingual

 

programme.

 

 

Sub

Records the sub sound for the bilingual

 

programme.

 

 

Dimmer

Adjusts the lighting of the front panel display.

Bright

Bright lighting.

 

 

Dark

Low lighting.

 

 

Off

Turns off the lighting.

 

 

Auto Display

On

Automatically displays information on the

 

screen when the recorder is turned on, etc.

 

 

Off

Displays information only when DISPLAY is

 

pressed.

 

 

Command Mode

Changes the Command Mode of the recorder if other DVD equipment is assigned the same Command Mode. Be sure to match the Command Mode switch on the remote to the setting made here. For details, see “Preparing the Remote” in the separate booklet, “Hookups and Setting.”

DVD1 Select this when the default Command Mode conflicts with other DVD equipment.

DVD2 Select this when the default Command Mode conflicts with other DVD equipment.

DVD3 The default Command Mode of the recorder.

82 Options Settings

Factory Setup

Allows you to select the setup settings by group, and return them to the default settings. Note that all of your previous settings will be lost.

1 Follow steps 1 to 3 of “Using the Setup Displays” (page 74) to select “Options” in the Setup Display.

2 Press M/m to select “Factory Setup,” then press

,or ENTER.

The display for selecting the group of settings appears.

3 Press M/m to select the group of settings you want to return to default from “Settings,” “Video,” “Audio,” “Features,” “Options” “Parental Control,” and “All,” then press , or ENTER.

The dialogue box appears.

4 Press </, to select “Start,” then press ENTER. The selected settings return to the default settings.

5 Press ENTER when “Finish” appears.