◆To erase the sceneAPress M/m to select “Erase,” then press

ENTER.

BWhen the display asks for confirmation, press </, to select “OK,” then press ENTER.

◆To move the sceneAPress M/m to select “Move,” then press

ENTER.

The display for selecting the scene insertion point appears.

BPress M/m to select the point, then press

ENTER.

The scene moves to the selected location.

◆To reset the start or end of the scene

Press M/m to select “Change IN” or “Change OUT,” then press ENTER.

◆To preview the scene

Press M/m to select “Preview,” then press ENTER.

To cancel, press </M/m/, to select “Quit,” then press ENTER.

fWhen you finish creating the Scene List, press </M/m/, to select “OK,” then press

ENTER.

The edited program is saved, and the display asks if you want to create a Playlist title.

If you select “No,” the display returns to the DV Edit menu. Go to step 9.

gPress </, to select “Yes,” then press

ENTER.

The display for entering a Playlist title name appears. To enter a new name, select “Enter,” and follow the explanations on page 18.

hTo use the default name, press </, to select “OK,” then press ENTER.

A Playlist title of the default title name is created on the same disc, and the display returns to the DV Edit menu.

You now have a disc containing both the entire contents of the DV/Digital8 format tape and a Playlist of the selected scenes.

To edit the Playlist title, see “Advanced Editing (Playlist Edit)” (page 54).

iDub the selected scenes to a disc.

Make copies of the selected scenes to a disc of your choice. Go to step 3 of “Creating a Copy of the Edited Contents (Copy Dubbing)” (page 69).

Notes

•The disc may not be recorded as programmed if the tape’s time code is not sequential or there are blanks between the recordings on the tape. In this case, follow the instructions of “Recording From Equipment Connected to the LINE IN Jacks” (page 71).

•You cannot set a scene to be shorter than one second.

•Start and end point of a program may be different from what you have

set if the source DV/Digital8 format tape is in any of the following conditions:

–Recording mode was changed during the recording.

–There is a blank space in the recorded portion.

•This function may not work with certain digital video cameras. In this case, follow the instructions of “Recording From Equipment Connected to the LINE IN Jacks” (page 71).

66 Advanced Program Edit