Specifications

System

Laser Semiconductor laser

Channel coverage PAL/SECAM (B/G, D/K, I, L) VHF: E2 to E12, R1 to R12, F1 to F10, Italian A to H, Ireland A to J, South Africa 4 to 13

UHF: E21 to E69, R21 to R69, B21 to B69, F21 to F69

CATV: S01 to S05, S1 to S20, France B to Q

HYPER: S21 to S41

The above channel coverage merely ensures the channel reception within these ranges. It does not guarantee the ability to receive signals in all circumstances.

Video reception: Frequency synthesizer system

Audio reception: Split carrier system

Aerial out

75-ohm asymmetrical aerial socket Timer

Clock: Quartz locked

Timer indication: 24-hour cycle (digital)

Power back-up duration: 1 hour Video recording format

MPEG Video

Audio recording format/applicable bit rate

Dolby Digital/2 ch, 256 kbps

Audio characteristics (Playback)

Frequency response

DVD (PCM 96 kHz): 4 Hz to 44 kHz

(±1.0 dB)/DVD (PCM 48 kHz): 4 Hz

to 22 kHz (±0.5 dB)/CD: 4 Hz to 20 kHz (±0.5 dB)

Signal-to-noise ratio (S/N ratio) DVD: 115 dB (LINE 2 OUT (AUDIO L/R) jacks only)

Harmonic distortion DVD: 0.002 %

Dynamic range

DVD: 110 dB/CD: 100 dB Wow and flutter

DVD: Less than detected value (0.001% W PEAK)

Audio characteristics (Recording/ Playback)

Frequency response

DVD (Dolby Digital 48 kHz):

10Hz-20 kHz (±1.0 dB) Signal-to-noise ratio

DVD: 96 dB Harmonic distortion

DVD: 0.004 % Dynamic range

DVD: 96 dB

The signals from LINE 2 OUT (AUDIO L/R) jack are measured. When you play PCM sound tracks with a 96 kHz sampling frequency, the output signals from the DIGITAL OUT (OPTICAL or COAXIAL) jack are converted to 48 kHz sampling frequency.

Inputs and outputs

LINE 2 OUT (AUDIO)

Phono jack

Output level: 2 Vrms

Load impedance: 10 kilohms (VIDEO)

Phono jack

Output level: 1.0 Vp-p (S VIDEO)

4-pin mini DIN

Output level: Y:1.0 Vp-p, C: 0.3 Vp-p (PAL)

LINE 4 IN (AUDIO)

Phono jack

Input level: 2 Vrms Input impedance: more than 22 kilohms

(VIDEO) Phono jack

Input level: 1.0 Vp-p (S VIDEO)

4-pin mini DIN

Input level: Y:1.0 Vp-p, C: 0.3 Vp-p (PAL)

LINE 2 IN (AUDIO)

Phono jack

Input level: 2 Vrms Input impedance: more than 22 kilohms

(VIDEO) Phono jack

Input level: 1.0 Vp-p (S VIDEO)

4-pin mini DIN

Input level: Y:1.0 Vp-p, C: 0.3 Vp-p (PAL)

LINE 1 -TV 21-pin

CVBS IN/OUT S-Video/RGB OUT (upstream)

LINE 3/DECODER 21-pin

CVBS IN/OUT

S-Video/RGB IN S-Video OUT (downstream) Decoder

DV IN 4-pin i.LINK S100

DIGITAL OUT (OPTICAL) Optical output jack

Output level: –18 dBm (wave

length: 660 nm)

DIGITAL OUT (COAXIAL) Phono jack

Output level: 0.5 Vp-p

Load impedance: 75 ohms

COMPONENT VIDEO OUT(Y, CB, CR) Phono jack

Output level: Y: 1.0 Vp-p/CB, CR: 0.7 Vp-p

General

Power requirements 220-240 V AC, 50/60 Hz

Power consumption

47W Dimensions (approx.)

430⋅ 89 ⋅ 381 mm (width/height/ depth) incl. projecting parts

Mass (approx.) 5.7 kg

Operating temperature

5ºC to 35 ºC Operating humidity

25% to 80 % Supplied accessories

Audio/video cord (1) Mains lead (1) Aerial cable (1)

Remote commander (remote) (1) R6 (size AA) batteries (2)

Compatible colour systems

This recorder is designed to record using the PAL colour system and play back using the PAL or NTSC colour systems. The signals of the SECAM colour system can be received or recorded but played back in the PAL colour system only. Recording of video sources based on other colour systems cannot be guaranteed.

Specifications and design are subject to change without notice.

Information Additional

Specifications 89