Component Out
Selects whether or not to output video signals from the COMPONENT VIDEO OUT jacks.
On | Outputs the component video |
| signals. Select this when you want |
| to view progressive signals. |
|
|
Off | Outputs no signals. |
|
|
Notes
•When you set “Line 1 Output” to “RGB,” you cannot set “Component Out” to “On.”
•When you connect the recorder to a monitor or projector via only the COMPONENT VIDEO OUT jacks, do not select “Off,” as the picture will not appear.
•When you set “Progressive” to “On,” you cannot set “Component Out” to “Off.”
•When you connect your TV using an HDMI cable, the “Component Out” setting is set to “On.”
The “Audio” setup allows you to adjust the sound according to the playback and connection conditions.
Select “Audio” in the “Setup” display. The default settings are underlined.
Audio |
| 10:10 | |
|
|
|
|
Title List |
| Digital Out | : On |
|
| ||
Timer |
| Downmix | : Dolby Surround |
|
| Audio DRC | : Standard |
Edit |
| ||
|
|
| |
|
| Audio (HDMI) | : Auto |
Dubbing |
| ||
| Scan Audio | : On | |
|
| ||
Disc Setting |
| Surround | : Off |
|
| DV Audio Input | : Stereo 1 |
Setup |
| ||
|
|
| |
|
| Line Audio Input | : Stereo |
Progressive
If your TV accepts progressive (525p/625p) format signals, you will enjoy accurate colour reproduction and high quality image.
Connect your TV to the COMPONENT VIDEO OUT jacks (page 17), and set “Component Out” to “On.”
On | Sets the recorder to output |
| progressive signals. |
|
|
Off | Outputs video signals in interlace |
| format. |
|
|
Notes
•When you set “Component Out” to “Off,” you cannot set “Progressive” to “On.”
•If you select progressive signals when you connect the recorder to a TV that cannot accept the signal in progressive format, the image quality will deteriorate. In this case, set “Progressive” to “Off.” Or, press DVD in stop mode to operate the DVD recorder, and then hold down X on the recorder for five seconds or more.
•When you connect your TV using an HDMI cable, the “Progressive” setting is set to “On.”
Digital Out
Selects if audio signals are output from the DIGITAL AUDIO OUT (OPTICAL or COAXIAL)/HDMI OUT jack.
On | Normally select this. Press |
| ENTER, and select “Dolby |
| Digital,” “DTS,” or |
| “MPEG” for further settings |
| (see below). |
|
|
Off | The influence of the digital |
| circuit upon the analogue |
| circuit is minimum. |
|
|
The following setup items switches the method of outputting audio signals when you connect a component such as an amplifier (receiver) with a digital input jack.
For connection details, see “Step 4: Connecting to Your AV Amplifier (Receiver)” on page 18.
Digital Out | 10:10 | |
Title List | Dolby Digital | : |
| ||
Timer | DTS | : Off |
Edit | MPEG | : PCM |
|
| |
Dubbing |
|
|
Disc Setting |
|
|
Setup |
|
|
104