Connect to the COMPONENT VIDEO OUT jacks using a component video cord (not supplied) or three video cords (not supplied) of the same kind and length. You will enjoy accurate colour reproduction and high quality images.
When you use this connection, select “On” for the component out setting in step 10 of Easy Setup (page 23).
If your TV accepts progressive 525p/625p format signals, you must use this connection and then set “Progressive” to “On” in the “Video” setup (page 104).
When using this connection, be sure to connect the audio cord to the LINE 2 OUT (AUDIO L/R) jacks.
COMPONENT VIDEO ININPUT
TV or projector
Y | PB/CB | PR/CR | L | AUDIO R |
(green) | (blue) | (red) | (white) | (red) |
| Audio/video cord (supplied) |
Component video cord |
|
(not supplied) |
|
(green) |
|
(blue) | (white) |
(red) | (red) |
to COMPONENT VIDEO OUT | to LINE 2 OUT (AUDIO L/R) |
: Signal flow
Note
During DVD recording, you cannot watch VHS pictures by pressing VIDEO, as the COMPONENT VIDEO OUT jacks will output DVD video signals only.
Settings and Hookups
17