The Timer List menu (page 86) appears.
If timer settings overlap, the message appears. To change or cancel a timer recording, select “Edit” from the Timer List (page 86).
7 Press SYSTEM MENU to turn off the menu.
8 Press )/1 (on/standby) to turn off the recorder.
The c indicator lights up in the front panel display, and the recorder is ready to start recording.
If the c indicator flashes in the front panel display, check that a tape with its safety tab in place is inserted.
To stop recording Press x twice.
If timer settings overlap See page 82.
To change or cancel timer recording
Select “VCR” for “Media,” and press
ENTER.
6
To re-enter the PlusCode number, press
CLEAR.
5

Press ENTER.

The date, start and stop times, programme position, recording mode, PDC/VPS setting (page 83), etc. appear.

 

 

 

 

 

Timer – Standard

 

 

 

 

 

 

 

 

 

10:10

 

 

 

No

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PDC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Edit

 

 

 

No.01

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

01

 

VCR

04/15

09:00

10:00

Prog. 1

SP

Off

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

02

 

VCR

04/30

09:15

09:45

Prog. 2

SP

 

PDC

 

 

 

 

Off

 

 

 

 

 

 

Media

Date

 

Start

 

End

 

Prog.

 

Mode /VPS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

03

 

 

 

 

--:

--

 

 

--:

--

 

 

 

 

 

 

---

 

 

 

 

 

 

 

 

 

VCR

15/04

 

09

:

00

 

10

:

00

 

Prog. 1

 

 

SP

 

Off

 

 

 

 

04

 

---

 

 

 

--

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

--/--

--:

 

--:--

 

----

---

 

---

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

05

 

---

--/--

--:--

--:--

 

----

---

 

---

 

 

 

 

 

 

 

 

 

 

VIDEO--/-- Plus+--:--

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

06

 

---

--:--

 

----

---

 

---

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If you want to change the setting, press </ , to select the item and press M/m to change the setting.

84

zHints

You can use the recorder after setting the timer. Just press )/1 to turn on the recorder. Turn off the recorder to return it to recording standby before the timer recording starts.

When the start time and the programme position or input source to be recorded are the same but the “Media” setting differs, the programme is recorded to both the DVD disc and the VHS tape.

You can also turn on the timer programming menu from the System Menu. Press SYSTEM MENU to select “Timer,” and select “Timer - VIDEO Plus+.”

Notes

To record a satellite programme, turn on the satellite tuner and select the satellite programme you want to record. Leave the satellite tuner turned on until the recorder finishes recording. If you connect equipment with a timer function, you can use the Synchro Rec function.

Even when correctly set, the programme may not be recorded if another recording is underway, or other prioritized timer setting overlaps.

Before the timer recording starts, “TIMER REC” flashes in the front panel display.

The recorder automatically turns off when a timer recording finishes.