To check the command mode for the recorder
Press x (stop) on the recorder when the recorder is turned off. The command mode for the recorder appears in the front panel display.
If the command mode for the recorder has not been changed, set the command mode for the remote to the default setting of DVD3. If the command mode for the remote is changed to DVD1 or DVD2, you will be unable to operate this recorder.
Changing programme positions of the recorder using the remote
You can change programme positions of the recorder using the number buttons.
| 1 | 2 | 3 |
Number | 4 | 5 | 6 |
buttons | 7 | 8 | 9 |
|
| 0 |
|
SET
Example: for programme position 50 Press “5,” “0,” then press SET.
zHint
The programme position automatically changes three seconds after you enter the numbers without pressing SET.
Follow the steps below to make the minimum number of basic adjustments for using the recorder. If you do not complete Easy Setup, it
will appear each time you turn on your recorder. | Hookups | ||||||
| |||||||
Settings are made in the following order. |
| ||||||
|
|
|
|
|
|
| |
OSD Language Setup |
|
|
| and | |||
|
|
|
|
|
| ||
m | |||||||
Settings | |||||||
|
|
|
|
|
| ||
Tuner and Channel Setup |
| ||||||
|
| ||||||
|
|
|
|
|
| ||
m |
| ||||||
|
|
|
|
| |||
Clock Setup |
|
|
|
|
|
| |
|
|
|
|
| |||
m |
| ||||||
|
|
|
| ||||
TV Type Setup |
|
|
|
|
| ||
|
|
|
| ||||
m |
| ||||||
|
|
| |||||
Video Connection Setup |
|
|
| ||||
|
|
| |||||
m |
| ||||||
|
| ||||||
Audio Connection Setup |
|
|
| ||||
|
|
| |||||
m |
| ||||||
Finished!
"/1
1 2 3
4 5 6
7 8 9
0
M/m/</,,
ENTER
ORETURN 
1 Turn on the TV.
2 Press "/1.
The recorder turns on.
,continued 23