DVD Timer Recording (Standard/VIDEO Plus+)

+RW -RWVR-RWVideo+R

-RVR-RVideo

You can set the timer for a total of 12 programmes together with DVD and VCR timer recording, up to one month in advance.

Note that the maximum continuous recording time for a single title is 12 hours. Contents beyond this time will not be recorded.

There are two methods to set the timer: the standard method and VIDEO Plus+ method.

Standard: Set the date, time, and programme position of the programme manually.

VIDEO Plus+: Enter the PlusCode number designated for each TV programme (page 54).

Note

The recorder must be in standby mode for the timer recording to be made.

Setting the timer manually (Standard)

Z )/1

DVD

1 2 3

4 5 6

7 8 9

0

SYSTEM TIMER

MENU

M/m/</,,

ENTER

x

1 Press DVD to operate the DVD recorder.

2 Press Z (open/close), and place a recordable disc on the disc tray.

Recording side facing down

3 Press Z to close the disc tray.

Wait until “LOAD” disappears from the front panel display.

Unused discs are automatically formatted. For the DVD-RW/DVD-R’s recording format (VR mode or Video mode), see “Formatting a new disc” on page 49.

4 Press TIMER.

 

 

 

 

 

Timer – Standard

 

 

 

 

 

 

 

 

 

 

 

10:10

 

 

 

No

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PDC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Edit

 

 

No.01

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

01

 

DVD

04/15

09:00

10:00

 

PR 1

SP

Off

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

02

 

DVD

04/30

09:15

09:45

 

PR 2

SP

 

PDC

 

 

 

 

Off

 

 

 

 

Media

Date

 

Start

 

End

Prog.

 

Mode /VPS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

03

 

 

 

 

 

--:

--

 

 

--:

--

 

 

 

 

 

 

 

 

---

 

 

 

 

 

 

 

 

DVD

Today

 

10

:

10

 

10

:

15

 

Prog. 1

 

 

SP

 

Off

 

 

 

 

04

 

 

---

 

 

 

--

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

--/--

--:

 

--:--

 

 

----

 

---

 

 

---

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

05

 

 

---

--/--

--:

--

--:--

 

 

----

 

---

 

 

---

 

 

 

 

 

 

 

 

 

 

VIDEO--/--Plus+--:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

06

 

 

---

--

--:--

 

 

----

 

---

 

 

---

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If the Timer programming (VIDEO Plus+) menu appears, press < to switch the display to “Standard.”

5 Select an item using </, and adjust using M/m.

A“Media”: Select “DVD.”

B“Date”: Sets the date using M.

To record the same programme every day or the same day every week, press m. The item changes as follows:

Today y Sun~Sat (Sunday to Saturday) y Mon~Sat (Monday to Saturday) y Mon~Fri (Monday to Friday) y Sun (every Sunday) y Mon (every Monday) y y Sat (every Saturday) y

1 month later y y Today

C“Start”: Sets the start time.

D“End”: Sets the stop time.

E“Prog.”: Selects the programme position or input source.

52