DVD Recording Without the Timer

+RW -RWVR-RWVideo

+R

-RVR-RVideo

Z

 

 

 

DVD

 

 

VIDEO

1

2

3

PROG +/–

4

5

6

 

78 9 INPUT

0

TV/VIDEO

DISPLAY

 

H

 

x

z REC

X

REC MODE

 

 

TV t

1 Press DVD to operate the DVD recorder.

2 Press Z (open/close), and place a recordable disc on the disc tray.

Recording side facing down

3 Press Z to close the disc tray.

Wait until “LOAD” disappears from the front panel display.

Unused discs are automatically formatted. For the DVD-RW/DVD-R’s recording format (VR mode or Video mode), see “Formatting a new disc” on page 49.

4 Press PROG +/– or INPUT repeatedly to select the programme position or input source you want to record.

5 Press REC MODE repeatedly to select the recording mode.

The display changes on the TV screen as follows:

HQ HSP SP LSP

SLP EP LP ESP

For details about the recording mode, see page 48.

6 Press z REC.

Recording starts.

Recording continues until you stop the recording or the disc is full.

To stop recording

Press x.

Note that it may take a few seconds for the recorder to stop recording.

To pause recording

Press X.

To restart recording, press X again.

To watch a VHS tape while recording

Press VIDEO to operate the VCR, insert a tape, then press H.

To watch another TV programme while recording

If your TV is connected to the i LINE 1 - TV jack, set your TV to the TV input using the TV/ VIDEO button and select the programme you want to watch.

If your TV is connected to the LINE 2 OUT, S VIDEO OUT, HDMI OUT, or COMPONENT VIDEO OUT jacks, set the TV to TV input using the TV t button (page 21).

zHints

•To play a disc recorded with this recorder on other equipment, finalise the disc (page 93).

•To select a programme position, you can use the number buttons (page 23).

•You can select a video source from the LINE jacks using the INPUT button.

•You can turn off the TV during recording. If you are using a satellite or digital tuner, make sure to leave it on.

50