“c” and “OTR” light up, and the remaining recording time appears in the front panel display.
When the time counter reaches “0:00,” the recorder stops recording and turns off.
To cancel the Quick Timer
Press z REC repeatedly until the counter appears in the front panel display. The recorder returns to normal recording mode.
To stop recording
Press x twice.
Checking the remaining tape length
You can check the recording information, such as remaining tape length or recording mode, etc.
Press DISPLAY while recording.
The information display appears.
Press the button repeatedly to change the display (page 77).
Record
0:30:00
SP
Rem 01:30
Prog. 1
ARecording status
BTime counter
CRecording mode
DRemaining tape length
ECurrent programme position
To check the remaining tape length, set “VCR Function” – “Tape Length” in the “Features” setup correctly (page 108).
Notes
•The remaining tape length may not be indicated accurately for short tapes such as
•After DISPLAY is pressed, it may take one minute for the remaining tape length to appear.
You can set the timer for a total of 12 programmes together with DVD and VCR timer recording, up to one month in advance.
There are two methods to set the timer: the standard method and VIDEO Plus+ method.
•Standard: Set the date, time, and programme position of the programme manually.
•VIDEO Plus+: Enter the PlusCode number designated for each TV programme (page 83).
Note
The recorder must be in standby mode for the timer recording to be made.
Setting the timer manually (Standard)
|
|
|
| VCR |
|
|
| )/1 | Recording |
|
|
|
| |
1 | 2 | 3 | VIDEO |
|
|
| |||
4 | 5 | 6 |
|
|
7 8 9
0
SYSTEM TIMER
MENU
M/m/</,,
ENTER
x
1 Press VIDEO to operate the VCR.
2 Insert a tape with its safety tab in place.
,continued 81