Sony RM-VL610 Programming remote, control signals to the, and System Control, buttons, Commander, Function (continued), Component Select buttons, remote control — Learning

Programming signals of another
	2 Press and hold the
remote control — Learning
Function (continued)		Component Select button
		for the component whose
Programming remote		signals are to be “learned”
control signals to the		for over 3 seconds.
Component Select buttons
and System Control
buttons		To teach signals to the SYSTEM
You can “teach” one operating		CONTROL buttons, press and
		hold the desired SYSTEM
procedure to a Component Select
		CONTROL button for over 3
button and System Control
		seconds.
buttons, so that when you press
the Component Select button and		Both the SET indicator and the
System Control buttons, the		selected Component Select
operation is also automatically		button light up.
done.
For example, if it is necessary to
switch the input selection of an
amplifier to DVD when you use a
DVD player, “teach” an input
select signal to the DVD button.
After “learning,” the input		When you “teach” signals to
selection of an amplifier is		the SYSTEM CONTROL
automatically switched to DVD		buttons, only the SET indicator
just by pressing DVD. (For this		lights up.
operation, the amplifier should		When the SET indicator lights
first be turned on.)
		up, you can release the
Example: To “teach” the DVD		Component Select button. The
		SET indicator flashes and the
input remote control signal of
		selected Component Select
your amplifier to the DVD
		button lights up (Learning
Component Select button of the
		function standby).
Commander
1 Follow Steps 1 to 2 (page
16).
		When you “teach” signals to
		the SYSTEM CONTROL
		buttons, you can release the
		SYSTEM CONTROL button
		when the SET indicator lights
		up. The SET indicator lights
		up, but the SYSTEM
		CONTROL button does not
		light up.

20