Sony RM-VL610 Executing a Series of Commands, —System Control Functions (continued)

Executing a Series of Commands—System Control Functions (continued)

Tips for programming the System Control functions

The following information helps you to program a consecutive operation steps.

About the order of operation steps

Some of the components may not accept consecutive remote control signals. For example, some TVs generally may not respond to the next signal right after the Power- on signal. So, a series of commands such as TV Power-on and input select may not work properly.

In this case, insert other signals to other components such as in the example below:

TV Power-ontVCR Power-ontVCR playbacktTV input select

To clear programmed commands

1Press and while holding SET, press and hold for more than 3 seconds the SYSTEM CONTROL button you want to clear.