DVR (Digital video recorder)
KEY DISPLAY
wsOK
FUNCTION
To enter the selection of the MENU display.
KEY DISPLAY
qdPOWER
3qh
1 – 9, 0, ENT
1INPUT
qfINFO (DISPLAY)
qaEXIT (CLEAR)
q;GUIDE (EPG)
qsm
qsH
qsM
qsREC z
FUNCTION
To turn on and off.
To change the channel. For example, to change to channel 5, press 0 and 5 (or, press 5 and ENT).
To switch the output of the SAT receiver to the TV. (When connecting a TV cable or antenna to the receiver, the output switches between a TV and SAT program).
To turn on the display.
To clear the setting.
To bring up Master Guide.
To rewind.
To play.
To
To record, press H while pressing REC z*2.
qjCHANNEL
+/–
7A (REPLAY*1)
8LIST*1
7B*1 (Live TV)
qlPAGE +*1 (THUMBS+)
qlPAGE
qgSLEEP
Channel up: +
Channel down: –
To replay
Or to go into REC/ REVIEW mode during play (After about 5- second rewind, replay begins).
To call up the title of the recorded program.
To bring up Master Guide.
To select the desired recorded program. (It is necessary to have recorded the desired program).
To select the desired recorded program. (It is necessary to have recorded the desired program).
To call up “Tivo” menu.
qsx
qsX
qs.
qs>
qs
qs
waMENU
wsf
wsF
wsG
wsg
qkRECALL
First release H, then release REC z.
To stop.
To pause.
To proceed to the previous location.
To proceed to the next location.
To operate “Flash
To operate “Flash +.”
To call up the MENU display.
To move the cursor upward.
To move the cursor downward.
To move the cursor to the right.
To move the cursor to the left.
To select the channel previously selected.
*1 This key corresponds to Tivo service or the replay service. Refer to its instruction manual for details.
*2 In order to avoid recording by mistake, the REC z button does not work by itself.
Continued
43