Controlling the Volume of Visual Components Connected to an Audio System
The Commander is factory preset based on the assumption that you hear the sound of your visual components from your TV speakers, and that you hear sound of your audio components from the loudspeakers connected to your amplifier.
For example, to control the volume while using a VCR, you don’t need to press the TV button to control the TV volume.
The following table shows the factory setting of which volume would be controlled for each component.
Component Select |
| Controls the volume of |
button |
|
|
TV |
| TV |
VCR |
| TV |
CBL |
| TV |
DVD |
| TV |
SAT |
| TV |
AMP |
| amplifier |
CD |
| amplifier |
TAPE |
| amplifier |
However, if your visual components are connected to an audio system, you may want to hear TV or VCR sound from the loudspeakers via your amplifier or DAV, not from your TV speakers. In this case, you need to change the factory preset so that you can control the volume of your visual components without first having to switch to the amplifier or DAV.
1Press and while holding SET, press MENU.
The SET indicator lights up.
Continued
25