Sony RM-VL610 Control Functions, Executing a Series of, Commands — System, Continued, Example: To watch a video, you can set a series of operations as follows:

Executing a Series of

Commands — System

Control Functions

With the System Control function, you can program a series of operating commands, and execute them by pressing just one button. You can program up to 16 consecutive operation steps to each of the SYSTEM CONTROL buttons (1 – 4).

If you have set the System Control function for a Component Select button (page 33), the execution of the programmed commands begins when you press the Component Select button for more than 2 seconds.

When executing the programmed commands, each remote commander signal is transmitted.

Example: To watch a video, you can set a series of operations as follows:

Power on the TV.

r

Power on the video (VCR).

r

Power on the amplifier.

r

Set the input selector of the amplifier to VIDEO 1.

r

Set the input mode of the TV to VIDEO 1.

r

Start video playback.

Continued

29