Sony RM-VL610 Erasing All Settings, —To reset the Commander to its factory settings

Erasing All Settings

—To reset the Commander to its factory settings

You can erase all remote control signals programmed by the “learned“ function to reset the Commander to its factory settings.

1While holding POWER pressed, press INPUT and VOL –.

When pressing the POWER button and the INPUT button, all the Component Select buttons go off. When pressing the VOL – button while holding down the POWER button and the INPUT button, the SET indicator lights up and the Component Select buttons light up one by one. When the SET indicator turns off at last, all settings are cleared, and the Commander returns to its original state.

35