Sony RM-VL710 Setting a component code by the Search function, Continued, Before starting the Search function

Setting a component code by the Search function

You can find a code number available for a component that doesn’t have one in the supplied “Component Code Numbers”.

1Press and while holding SET, press MENU.

SET +

All Component Select buttons flash.

TV VCR CBL DVD AMP

Before starting the Search function

Set each component to the following status so that the Search function works effectively.

TV, AMP: Power-on

CD player*, MD player*, cassette deck*: Power-on with a playback source (disc, cassette tape, etc.)

Other components: Power-off

*If any of these components are assigned to any of the Component Select buttons (page 30), you can set a component code using the Search function.

1 2 3

4 5 6

7 8 9

0 ENT 4

2Press the Component Select button for the desired component.

The selected Component Select button lights up, and all other buttons turn off.

TV VCR CBL DVD AMP

3Press CH + or CH – and POWER in turn until the component reacts as described in the following.

TV: Powers off

VCR, CBL, DVD, AMP: Powers on

CD player, MD player, cassette deck: Plays back

POWER

Press CH + to go to the next code number.

Press CH – to go back to the previous code number.

The Component Select button flashes three times after the numbers have turned one cycle.

One cycle means, for example, the four-digit code numbers beginning from “8” are cycled through.

Continued