Sony RM-VL710 To control the volume

2Press any Player Control button.

See “Table of Preset Functions” (page 37) for the functions of buttons for each component.

Note

The remote control signals may be different for some components or functions. In this case, program the remote control signals with the Learning function (page 14). Note, however, that components and functions that do not support the remote control of infrared signals will not work with this Commander.

To control the volume

Press VOL +/– to control the volume. Press MUTING to mute the sound.

When you select a visual component, the TV’s volume will be controlled (TV Component Select button lights up), and when you select an audio component, the amplifier’s volume will be controlled (AMP Component Select button lights up). You can change this setting also (page 23).

Notes

•If you used the Learning function (page 14) to program the VOL +/– or MUTING buttons to send a signal to any other component, that signal will be transmitted instead of the volume or muting of the TV or amplifier when you select that component.

•If you used the Learning function (page 14) to program the VOL +/– or MUTING buttons for the TV or AMP to send a signal to any other component, that signal will be transmitted only when you select TV or AMP. When you select another component, the preset volume control signals for TV or AMP will be transmitted.

•If you have assigned another component to the TV or AMP buttons (page 30), the volume of the TV or amplifier cannot be controlled even if you select another component.

13