Sony RM-VL710 Operating Your Components with the Remote Commander, Example: To operate a video cassette recorder

Setting a component code by the Search function (continued)

4Press ENT.

ENT

The Component button turns off.

If the Component Select button flashes five times before turning off, it means that the setup is incomplete. Start over from Step 1.

5Check if the code number works by following the instructions on page 10.

Notes

•If you don’t input anything into the Commander within 20 seconds between each step, the setup procedure will be canceled. To set the code, start over from the beginning.

•If you press any button other than CH +/– and POWER while setting the component code, all code numbers will be lost, and the setup procedure will be canceled. Start over from the beginning.

Operating Your Components with the Remote Commander

When you operate a non-Sony component, make sure you set the component code first (page 8).

SET	POWER	1
TV	VCR CBL DVD AMP

1 2 3

4 5 6

7 8 9

0 ENT

2

To cancel setup, press SET.

Example: To operate a video cassette recorder

1 Press the desired Component Select button.

The Component Select button lights up when you press it, and turns off when you release it.

12