Sony RM-VL710 Executing a Series of Commands, —System Control Functions (continued)

Executing a Series of Commands—System Control Functions (continued)

Tips for programming the System Control functions

The following information helps you to program a consecutive operation steps.

About the order of operation steps

Some of the components may not accept consecutive remote control signals. For example, a some TVs generally may not react respond to the next signal right after the Power-on signal. So, a series of commands such as TV Power-on and input select may not work properly.

In this case, insert other signals to other components like such as in the example below:

TV Power-ontVCR Power-ontVCR playbacktTV input select

To clear programmed commands

1Press and while holding SET, press and hold for more than 3 seconds the SYSTEM CONTROL button you want to clear.

28