Programming signals of another remote control — Learning Function (continued)

Example: To erase the “learned” function from the Number button 1 in VCR mode

Changing or erasing the function of a “learned” button

To change the “learned” function, clear it first and perform Learning again.

To clear the “learned” function of a single button1,3

SETPOWER

TV VCR CBL DVD AMP

1 2 3

4 5 6

7 8 9

0 ENT

2

1Press and hold SET for over 3 seconds.

SET

The SET indicator lights up, and all Component Select buttons flash.

SET

TV VCR CBL DVD AMP

2While holding the desired Component Select button pressed, press the button you want to erase.

+

When erasing of “learned” function is completed, the selected Component Select button light turns off.

SETSET

VCR

VCR

during data

data erasing

erasing

complete

Note

Be sure to press the button you want to erase while pressing the Component Select Button. If you release the Component Select button, the Commander changes to Learning mode.

3Press SET to finish setting.

To cancel erasing, press SET.

20