Sony RS-232C manual Auto MIX Edit Parameter Request 52H 41H 4DH 50H Ramp

Models: RS-232C

1 62
Download 62 pages 46.73 Kb
Page 27
Image 27

AUTO MIX EDIT PARAMETER REQUEST: 52[H] 41[H] 4D[H] 50[H] ('RAMP')

This command is used to read respective parameters of the automatic mixer from the SRP-X700P.

Caution

This command is supported by the SRP-X700P firmware versions of 1.20 and higher.

Packet format

52[H] 41[H] 4D[H] 50[H] 0D[H]

Return packet format

When communication with the SRP-X700P is established with success, the parameter is returned together with ACK(41[H]('A')) in the order shown below.

41[H]"parameter"0D[H]

The parameter is the same as the 14 bytes of the AUTO MIX PARAMETER command.

FACTORY PRESET : 43[H] 52[H] 53[H] 54[H] ( ‘CRST’ )

This command is used to return the parameters of the SRP-X700P to the default values when shipped from the factory.

Packet format

43[H] 52[H] 53[H] 54[H] 0D[H]

When communication with the SRP-X700P is established with success, all parameters including scene memories return to the default state when shipped from the factory.

Caution

When the parameters are returned to the default state when shipped from the factory, all parameters that have been set by users will be overwritten.

Before starting to execute this command, create backup of the parameter values using the supplied software SRP-X700P Manager.

– 27 –

Page 27
Image 27
Sony RS-232C manual Auto MIX Edit Parameter Request 52H 41H 4DH 50H Ramp, Factory Preset 43H 52H 53H 54H ‘CRST’