Sony RS-232C manual Line 4 Input 43H 49H 4DH 34H ‘CIL4’

LINE 4 INPUT : 43[H] 49[H] 4D[H] 34[H] (‘CIL4’)

This command is used to implement setting up the LINE 4 input channel.

Various setups can be memorized in the scene memories by specifying these scene Nos.

•Packet format

43[H] 49[H] 4D[H] 34[H] “parameter” 0D[H]

•Parameter

The parameter consists of the 64 bytes all the time in the order as shown in the table below.

byte	Parameter name	byte	Parameter name
1st	SCENE No.	54th	LINE4 E TRIM
2nd-9th	LINE4 A INDEX	55th	LINE4 F TRIM
10th-17th	LINE4 B INDEX	56th	FUNCTION ON/OFF
18th-25th	LINE4 C INDEX	57th	PEQ1 Frequency
26th-33rd	LINE4 D INDEX	58th	PEQ1 Q
34th-41st	LINE4 E INDEX	59th	PEQ1 GAIN
42nd-49th	LINE4 F INDEX	60st	PEQ2 Frequency
50th	LINE4 A TRIM	61st	PEQ2 Q
51st	LINE4 B TRIM	62nd	PEQ2 GAIN
52nd	LINE4 C TRIM	63rd	GAIN LIMIT LEVEL
53rd	LINE4 D TRIM	64th	FADER LEVEL

When you specify NONE (30[H] ‘0’) as the scene No. in the 1st byte, you can establish the present setup.

At the same time, when you specify the scene No.(31[H] (‘1’) through 44[H] (‘D’)), parameters of the subsequent 2nd through 64th bytes are written in the scene memory.

The method of setting the scene No. and index of LINE4A through F, is the same as that of the GROUP FADER command. See pages 29 and 30.

Method of setting the LINE4A-F TRIM, FUNCTION ON/OFF, PEQ1,2 frequency, PEQ1,2 Q, PEQ1,2 Gain, Gain Limit level and input fader level is the same as that of the LINE 3 INPUT command. See pages 32 to 35.

For the packet example, see the example of the LINE 3 INPUT command on page 35. However, the parameter length becomes 64 bytes.

LINE 4 INPUT PARAMETER REQUEST : 52[H] 49[H] 4D[H] 34[H] (‘RIL4’)

This command is used to read setup of the LINE 4 input channel from the SRP-X700P.

•Packet format

52[H] 49[H] 4D[H] 34[H] “parameter” 0D[H]

•Parameter

Specify the scene No. of the scene memory that you want to read, as the parameter.

Method of specifying the scene No. is the same as that of the GROUP FADER command. See page 29.

•Return packet format

When communication with the SRP-X700P is established with success, the parameter is returned together with ACK (41[H] (‘A’)) in the order shown below.

41[H] “parameter” 0D[H]

The parameter is the same as the 63 bytes of the LINE4 INPUT command parameter from which the scene No. is exempted.

– 36 –