Sony RS-232C manual Function 1, 2 10, 11th byte, Routing Input Selector Fader Muting Function

•Scene No. (1st byte)

This command is used to specify the scene No. to be stored.

SCENE No.		SCENE No.
1	31[H] ( ‘1’ )	11	3B[H] ( ‘;’ )
2	32[H] ( ‘2’ )	12	3C[H] ( ‘<’ )
3	33[H] ( ‘3’ )	13	3D[H] ( ‘=’ )
4	34[H] ( ‘4’ )	14	3E[H] ( ‘>’ )
5	35[H] ( ‘5’ )	15	3F[H] ( ‘?’ )
6	36[H] ( ‘6’ )	16	40[H] ( ‘@’ )
7	37[H] ( ‘7’ )	17	41[H] ( ‘A’ )
8	38[H] ( ‘8’ )	18	42[H] ( ‘B’ )
9	39[H] ( ‘9’ )	19	43[H] ( ‘C’ )
10	3A[H] ( ‘:’ )	20	44[H] ( ‘D’ )

•Function 1, 2 (10, 11th byte)

This command is used to specify the function to implement recalling at the event of scene recall with the two 8-bit data.

When you want to recall the scene, set the corresponding bit to 1. When you do not want to recall the scene, set the corresponding bit to 0.

If bit 5 (Clear) of the function 1 is 1, the scene memory is cleared and the scene will not be recalled. Bit-6 and bit-7 of the function 1 and bit-5 to bit-7 of the function 2 are fixed all the time.

<Function 1>
bit7	bit6	bit5	bit4	bit3	bit2	bit1	bit0
0	1	Clear	ROUTING	AV	INPUT	INPUT	INPUT
				SELECTOR	FADER	MUTING	FUNCTION
<Function 2>
bit7	bit6	bit5	bit4	bit3	bit2	bit1	bit0
0	1	0	FADER	GROUP	OUTPUT	OUTPUT	OUTPUT
			GROUP	MUTING	FADER	MUTING	FUNCTION

Example: When setting the respective parameters as shown below.

Scene No.	: 1
Index	: START
Function 1,2	: All recall

43[H] 53[H] 54[H] 52[H] 31[H] 53[H] 54[H] 41[H] 52[H] 54[H] 20[H] 20[H] 20[H] 5F[H] 5F[H] 0D[H]

(‘C S T R 1 S T A R T s s s _ _ CR’)

“s” indicates the space.

– 60 –