![](/images/new-backgrounds/1118660/11866047x1.webp)
BBV Rx 100 Interface Receiver
Addendum to manual for the following domes:
Panasonic
Rx100 software RX1_P1V10
Application Notes
Variable speed Pan/Tilt.
Zoom/Focus, Autofocus, Iris Open/Close (Hold for
2 preset patrols
4 alarm inputs driving to preset 1 – 4 Autopan/Patrol
Advanced Features | Tx400 | Tx1000 | Tx1500 | DM Sprite/DS/DS2/BX2 |
| |
ENTRY/EXIT Dome Menu | ‘#’ 1 | '#' WASH | 1 | ’#’ | *889 002 or *889 10 10 2 | |
SET (select menu item) | ‘#’ 2 | '#' WIPE | 2 | ’#’ | *889 003 or *889 10 10 3 | |
ESC (back to previous menu) | ‘#’ 3 | '#' AUTOPAN | 3 | ’#' | *889 004 or *889 10 10 4 | |
SPECIAL2 (for special menus) | ‘#’ 4 | '#' LIGHTS | 4 | '#' | *889 005 or *889 10 10 5 |
A dome RESET ALL command can be sent by holding either ‘#’LIGHTS or ‘#’4 for 5 seconds when not within the menu. Care must be used with this command as the dome is set to default and user settings are erased.
The dome’s internal PATROL can be LEARNED using the dome menu. Setting the AUTO PAN KEY to PATROL will allow the patrol to be PLAYED by pressing AUTOPAN on the controller.
RS485 control of dome. Connect dome
Dome Cable | Description | Rx100 |
Yellow | Data- | J3/C1 |
Green | Data+ | J3/C2 |
Notes:
The alarm output relay opens for approx 5 seconds upon power up. This can be used to signal power loss, etc.
Accessing the dome menus.
Press either '#'WASH , '#'1 or *889 002 key strokes to Enter Menu. Use Pan/Tilt to highlight item. Press either '#'WIPE, '#'2 or *889 003 key strokes to select menu item. ‘#’WASH , ‘#’3 or *889 004 is used to ESCAPE back to previous menu. SPECIAL2 menus are accessed using ‘#’LIGHTS, ‘#’4 or *889 005. To exit from menu, press either '#'WASH, '#'1 or *889 002.
Check with the multiplexer manual for exact procedure for entering * commands.
Dome Switch settings: The following procedure must be followed to ensure that the dome is
Step 1: Address switches 2,4 and 5 ON
Step 2: Address switches 1,3,4 and 5 ON
Step 3: Address switches 1 and 8 ON. 4 Way switch 1 ON to select 4 wire, terminated RS485.
Panasonic
Rx100 installation manual V1.17 29 Aug 08.doc | Page 24 |