Dubbing a tape easily – Easy Dubbing

Step 5: Performing Easy Dubbing

Make sure that your camcorder and VCR are connected, and that the VCR is set to recording pause.

When you use a video camera recorder, set its power switch to VTR/VCR. Set the POWER switch of your camcorder to PLAYER.

(1)Turn the SEL/PUSH EXEC dial to select START, then press the dial.

(2)Turn the SEL/PUSH EXEC dial to select EXECUTE, then press the dial. When dubbing ends, your camcorder and VCR stop automatically. Then the display returns to the Easy Dubbing initial screen.

To stop dubbing during editing

Press x on your camcorder.

To quit Easy Dubbing

Press EASY DUB.

Note

If you set the background color to FADE in Step 3 (p. 103), the picture may not appear properly depending on the connected VCR.

You cannot record on the VCR when:

–The tape has run out.

–The write-protect tab is set to lock.

–The IR SETUP code is not correct.

–The button used to cancel recording pause is not correct.

NOT READY appears on the screen when

START is not carried out.

Editing

105