Using the fader function

(1) To fade in [a]

In the standby mode, press FADER until the desired fader indicator flashes.

To fade out [b]

In the recording mode, press FADER until the desired fader indicator flashes. The indicator changes as follows:

FADER t M.FADER t STRIPE t BOUNCE t MONOTONE

no indicator

 

DOT

 

WIPE

 

OVERLAP

 

 

 

The last selected fader mode is indicated first of all.

(2) Press START/STOP. The fader indicator stops flashing.

After fade in/out ends, your camcorder automatically returns to the normal mode.

1

FADER

FADER

To cancel the fader function

Before pressing START/STOP, press FADER repeatedly until the indicator disappears.

Notes

•The OVERLAP, WIPE and DOT functions do not work with tapes recorded in the

Hi8 /standard 8 mmsystem.

•You cannot use the following functions while using the fader function. Also, you cannot use the fader function while using the following functions:

–Digital effect

–Color Slow Shutter

–Super NightShot

–Tape Photo recording

–Interval recording

–Frame recording

62