Inserting a scene from a VCR – Insert Editing

Notes

•The zero set memory function does not work with tapes recorded in the Hi8 / standard 8 mm system.

•Pictures and sound recorded on the section between the insert start and end points will be erased when you insert the new scene.

•If you use the Remote Commander when dubbing a tape, the VCR may operate accidentally. Should this happen, change the commander mode of the VCR to one other than VTR2, or cover the sensor of the VCR with black paper.

If you insert scenes on the tape recorded on another camcorder

The pictures and sound may be distorted. We recommend that you insert scenes on a tape recorded on your camcorder.

When the inserted picture is played back

Pictures and sound may be distorted at the end of the inserted section. This is not a malfunction.

Pictures and sound at the start point and the end point may be distorted in the LP mode.

To insert a scene without setting the insert end point

Skip step (3) and (4). Press xwhen you want to stop inserting.

Editing

125