Connecting your camcorder to your computer using the USB cable
Installing the USB driverStart the following operation without connecting the USB cable to your computer.
Connect the USB cable according to “Making the computer recognize the camcorder.”
If you are using Windows 2000, log in with permission of administrators.
If you are using Windows XP, log in with permission of computer administrators.
(1) Turn on your computer and allow Windows to load.
(2) Insert the supplied
(3) Select “Handycam” on the screen.
Click
The title screen appears.
(4) Move the cursor to “USB Driver” and click. This starts USB driver installation.
Click
(5) Follow the
(6) Remove the
Note
If you connect the USB cable before USB driver installation is complete, the USB driver will not be properly registered. Carry out installation again following the steps on page 194.
Computer Your on Images Viewing
189