Superimposing a still image in the “Memory Stick” on an image–MEMORY MIXRecording superimposed images on a tape

Before operation

•Insert a tape for recording into your camcorder.

•Insert a “Memory Stick” containing still images into your camcorder.

(1) Set the POWER switch to CAMERA.

(2) In the standby mode, press MEMORY MIX.

The first recorded image appears in the bottom-right corner of the screen as a thumbnail image. The last image that is used in MEMORY MIX will be displayed next time.

(3) Press MEMORY+/– to select the still image you want to superimpose.

–: To see the previous image + : To see the next image

(4) Turn the SEL/PUSH EXEC dial to select the desired mode. The mode changes as follows:

M. CHROM y M. LUMI y C. CHROM y M. OVERLAP (5) Press the SEL/PUSH EXEC dial.

The still image overlaps with the picture on the screen. (6) Turn the SEL/PUSH EXEC dial to adjust the effect.

M. CHROM – The degree of the blue areas in the still image which is to be swapped with a moving picture

M. LUMI – The brightness of the area in the still image which is to be swapped with a moving picture

C. CHROM – The degree of the blue areas in the moving picture which is to be swapped with a still image

M. OVERLAP – No adjustment necessary

The fewer bars there are on the screen, the stronger the effect becomes.

(7) Press START/STOP to start recording.

2

 

START/STOP

 

 

 

 

MEMORY

 

 

 

MIX

 

4

 

 

 

M. LUMI

M. CHROM

 

 

101

 

 

 

 

 

 

101–0021

101

 

5

M. LUMI I I I • • • •

101–0021

 

Still image

 

 

101

 

3

 

101–0021

 

6

M. LUMI I • • • • • •

 

 

 

 

 

101

 

 

 

101–0021

Recording – Operations ”Stick Memory“

141