13

Games

Certain games that use gun or rifle controllers to shoot at on-screen targets cannot be used with this product.

Changing the angle of the display panel

When the LCD screen (for PS one™) is connected to the PS one™ console, the display panel can be adjusted for viewing within the range of motion shown in the chart at right. If too much pressure is applied to the display panel, damage to the LCD screen may result. When changing the angle of the display panel, be careful not to bend it too far. Also, close the display panel when

the LCD screen is not in use.

Closing the LCD screen

When closing the LCD screen, make sure that there is nothing between the PS one™ console and the LCD screen. Also, close the disc cover of the console before closing the LCD screen. If you close both at the same time, damage to the screen may result.

Transporting the LCD screen

Before carrying the LCD screen, make sure you disconnect it from any cables. If you drop the LCD screen, personal injury or damage to the LCD screen may result.

Cleaning the LCD screen

For safety reasons, before cleaning the LCD screen, disconnect the AC adaptor from the electrical outlet.

Cleaning the exterior

•Do not use paint thinner or other chemicals to clean the exterior of the LCD screen as these may damage the surface. When using a commercially available cleaning cloth, follow the usage instructions supplied with the cloth.

•If the exterior of the LCD screen becomes dirty, soak a soft cloth in a mild detergent solution diluted with water, tightly squeeze the cloth to remove the excess liquid, wipe the affected area of the exterior, and finish by wiping with a dry cloth.

Cleaning the screen

•Avoid touching the screen surface except when necessary for cleaning, as this may damage it.

•Do not use a wet cloth to clean the screen. If water gets inside, it may damage the LCD screen.

•If the screen becomes dirty, wipe off the screen surface with a soft, dry cloth.

English