Using the stereo speaker

You can listen to music, sounds, and other audio files using the stereo speaker of your monitor.

Connect the AUDIO IN jack to the audio output jack of your computer or other audio equipment using the supplied audio cord (stereo miniplug).

Adjusting the volume

Volume adjustments are made using a separate VOLUME menu from the main menu (page 11).

1Press the 2 +/– buttons.

The VOLUME menu appears on the screen.

VOL UME

4 0

2Press the 2 +/– button to adjust the volume.

The menu automatically disappears after about 3 seconds.

Using the headphones jack

You can listen to the audio signals from your computer or other audio equipment using headphones. Connect your headphones to the headphones jack. The speaker turns off when headphones are connected to the headphones jack. Adjust the volume of the headphones using the VOLUME menu.

Notes

You cannot adjust the volume when displaying the main menu on the screen.

When your monitor is in low power consumption mode or power saving mode, no sound comes from the speaker.

Selecting the input signal

You can connect two computers to this monitor using the INPUT 1 and INPUT 2 connectors. To select one of the two computers, use the INPUT button.

Press the INPUT button.

The input signal and corresponding input indicator, “1” (INPUT 1) or “2” (INPUT 2) change each time you press this button.

INPUT

1

2

OK

Notes

You cannot select the input signal when displaying the main menu on the screen.

If no signal is input to the selected connector, NO INPUT SIGNAL or CABLE DISCONNECTED appears on the screen. After a few seconds, the monitor enters the power saving mode. If this happens, select the other connector using the INPUT button.

10